Call Us Today!
1-800-730-0292
sales@dosupply.com

Allen Bradley CompactLogix

1769-ECR | Allen Bradley CompactLogix

DO Supply Company is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Available

Ships Today!

Request a Quote
Manufacturer Allen Bradley CompactLogix
Description The 1769-ECR is a CompactLogix component used to terminate the communication bus. This module is installed after the last module of the chassis.
Weight 2 lbs :: ≈ 1 kgs
Warranty 1 Years
Technical Specifications
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Product Family: CompactLogixProduct Type:
Shipping weight: 130 g (0.286 lb)
Dimension: 4.65 inches X 3.35 Inches X 0.71 inches. (H x W x D)
Current Draw @ 5.14Vdc: 5 mA
Current Draw @ 24Vdc: 0 mA
Operating Altitude: 2000 meters (6561 feet)
Relative Humidity: 5% to 95% non-condensing
Vibration: 5 g, 10…500 Hz
Operating Shock: DIN rail mount: 20 g; Panel mount: 30 g
Non-Operating Shock: DIN rail mount: 30 g; Panel mount: 40 g
About the 1769-ECR
The 1769-ECR is used with Allen Bradley’s 1769 CompactLogix family of controllers. Installed after the last module, the purpose of the module is to terminate the communication bus, signaling end of the end point. The 1769-ECR is similar to a terminating resistor. The terminating resistor consumes the signals, in the form of voltages, present in the communication bus. Similarly, the 1769-ECL establishes Processor communication and allows the controller to identify the end of the chassis by consuming the signals present after the last module of the chassis thus, terminating the communication bus. The 1769-ECR electrostatic sensitive device as it contains electronic components installed on a PCB board housed by the component. Before installing, touch a grounded object to discharge static potential, or wear a wrist strap. Avoid touching the conductors and electronic components while in the process of insertion. Store the component in a static safe location and work on a static safe station. The 1769-ECR is installed on the right side of the chassis. To the right of the PLC CPU, locate the last module of the chassis. Slide the component from the top aligned with the last module. Switch the bus lever to establish connection to the bus. If restriction is felt, verify alignment of the component and ensure each of the contacts are not deformed. Hot-swap feature is not supported by this module. Do not attempt to install and uninstall the component on a powered or functioning system. Performing this may render the system unresponsive, switch to an uncontrollable state or completely shut down. The module’s dimension is 3.35 Inches wide, 4.65 inches long and depth of 0.71 inches.
Revisions: 1769-ECRA , 1769-ECRB , 1769-ECRC , 1769-ECRD , 1769-ECRE , 1769-ECRF , 1769-ECRG , 1769-ECRH , 1769-ECRI , 1769-ECRJ , 1769-ECRK , 1769-ECRL , 1769-ECRM , 1769-ECRN , 1769-ECRO , 1769-ECRP , 1769-ECRQ , 1769-ECRR , 1769-ECRS , 1769-ECRT , 1769-ECRU , 1769-ECRV , 1769-ECRW , 1769-ECRX , 1769-ECRY , 1769-ECRZ ,

Disclaimer*
Some of the products sold by Do Supply Inc. may come with firmware installed on them. Do Supply Inc. makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. Read more...