Call Us Today!
1-800-730-0292
sales@dosupply.com

Allen Bradley CompactLogix

1769-IF16V | Allen Bradley CompactLogix

DO Supply Company is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Available

Ships Today!

Request a Quote
Manufacturer Allen Bradley CompactLogix
Description The 1769-IF16V is a high-density voltage input module for 1769 CompactLogix platform. It can accept a variety of voltage signal within the range of 0-10VDC.
Weight 2 lbs :: ≈ 1 kgs
Warranty 1 Years
Technical Specifications
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 1769-IF16V
Product Type Analog Input Module
No. of Inputs: 16 Single Ended Inputs
Input voltage range: 0-10.5VDC
Input signal normal ranges: ±10V DC, 0 …10V DC, 0…5V DC, 1…5V DC
Input signal full range: ±10.5V DC, -0.5…10.5V DC, -0.5…5.25V DC, 0.5…5.25V DC
Resolution: 16 bits (unipolar); 15 bits plus sign (bipolar)
Rated working voltage: 30VAC; 30VDC
Channel Diagnostics: Over- or under-range by bit reporting, process alarms
Slot width: 1
Module OK indicator: On: The module has power, has passed internal diagnostics, and is communicating over the bus. Off: Any of the above is not true.
Power Supply Distance rating: 8
Dimension: 118 mm x 87 mm x 35 mm (4.65 in. x 3.43 in. x 1.38 in.) Height including mounting tabs is 138 mm (5.43 in.)
About the 1769-IF16V
The 1769-IF16V is used with Allen Bradley’s MicroLogix 1500 and 1769 CompactLogix family of controllers. This module is able to accommodate 16 voltage inputs. Each channel can be configured to receive signals +/10VDC, 1-5VDC, 0-5VDC, 0-10VDC with full ranges of +/- 10.5 VDC, 0.5 - 5.25 VDC, -0.5 - +5.25VDC, -0.5 - +10.5VDC respectively. The module has a built in Analog to digital (ADC) circuit to convert the analog input to digital signal for processing. The processed data can be configured as engineering units, scaled for PID, percent range and raw data. The 1769-IF16V is configured using RSLogix 500 when used with MicroLogix 1500, RSLogix5000 or Studio 5000 programming software when used with CompactLogix. Each channel can be individually configured to receive the necessary voltage input range. Process alarms can also be configured by defining the module’s high and low alarm parameters. While other configurable parameters are input filters, real time sampling, alarm deadband and others. Open circuit detection is activated with any enabled channels. This setting is reported as under-range error of the module. This event can be made known to the controller and display as a non-fatal system error. There is no limit with the number of installation analog input module. Ensure that proper power supply sizing is observed. The module can be installed within 8 modules from the power supply. It can be inserted to any adjacent I/O module including the controller in the chassis. Install the module by locating the guide slots of the adjacent module. Slide the module and establish alignment of the bus connectors. Once bus connectors are aligned, move the bus lever to the left until a clicking sound is created.
Revisions: 1769-IF16VA , 1769-IF16VB , 1769-IF16VC , 1769-IF16VD , 1769-IF16VE , 1769-IF16VF , 1769-IF16VG , 1769-IF16VH , 1769-IF16VI , 1769-IF16VJ , 1769-IF16VK , 1769-IF16VL , 1769-IF16VM , 1769-IF16VN , 1769-IF16VO , 1769-IF16VP , 1769-IF16VQ , 1769-IF16VR , 1769-IF16VS , 1769-IF16VT , 1769-IF16VU , 1769-IF16VV , 1769-IF16VW , 1769-IF16VX , 1769-IF16VY , 1769-IF16VZ ,

Disclaimer*
Some of the products sold by Do Supply Inc. may come with firmware installed on them. Do Supply Inc. makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. Read more...