Call Us Today!

Allen Bradley CompactLogix

1769-IQ6XOW4 | Allen Bradley CompactLogix

DO Supply Company is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.


Ships Today!

Request a Quote
Manufacturer Allen Bradley CompactLogix
Description The 1769-IQ6XOW4 is a combination 24VDC Sink/Source input and AC/DC relay output module. This module has Six (6) inputs and Four (4) outputs.
Weight 2 lbs :: ≈ 1 kgs
Warranty 1 Years
Technical Specifications
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 1769- IQ6XOW4
Product Family: CompactLogix
Product Type Discrete Input / Output Module
No. of Inputs: 6
Input Voltage Category: 24V DC sink/source
Operating voltage range: 10 to 30V dc at 30°C (86°F) 10 to 26.4V dc at 60°C (140°F)
Off-state Voltage: 5V DC
On-state Voltage: 10V DC
Input delay, On: 8 ms
Input Delay, Off: 8 ms
Outputs: 4
Output Voltage Category: AC/DC normally open relay
Operating Voltage range: 5 to 265V ac 5 to 125V dc
About the 1769-IQ6XOW4
The 1769-IR6 is used with Allen Bradley’s MicroLogix 1500 and 1769 CompactLogix family of controllers. This module support Six (6) RTD or direct resistance signal measurements. The module through its Analog to Digital converter circuit translates the resistance measurement to digital values. These values are acceptable through the module’s data table. The module supports up to Six (6) devices. The channels are individually configured via the RSLogix 500 when used with MicroLogix controller, RSLogix5000 or Studio5000 programming software when used with a Compactlogix controller. The inputs are configurable to 2 and 3 wire RTDs, direct resistance input and 4-wire sensors. For 4-wire RTDs, one of the 2 compensation wires will not be used thus, the RTD is functioning similar to a 3-Wire RTD. The module supports RTD types Copper 426, Nickel 618, Nickel 672, Nickel-Iron 518, Platinum 385, Platinum 3916. The module’s channels are capable of sensing open circuit, short-circuit and over and under-range sensor detection. Each of the channel filters are individually configured with filtering frequency options 10 Hz 50 Hz 60 Hz 250 Hz 500 Hz 1 kHz. For direct resistance measurement, the module supports 150 ?, 500 ?, 1000 ?, 3000 ?. Direct resistance measurements when used with the module is assumed to be linear in nature. Autocalibration is performed by the module once enabled. This autocalibration feature is cyclic and can be programmed to repeat every Five (5) minutes. This feature can be disabled by accessing Word 6 Bit 0 of the module’s data table. Further configuration of the module includes open circuit response, engineering units, input type, data format, excitation current and data format.
Revisions: 1769-IQ6XOW4A , 1769-IQ6XOW4B , 1769-IQ6XOW4C , 1769-IQ6XOW4D , 1769-IQ6XOW4E , 1769-IQ6XOW4F , 1769-IQ6XOW4G , 1769-IQ6XOW4H , 1769-IQ6XOW4I , 1769-IQ6XOW4J , 1769-IQ6XOW4K , 1769-IQ6XOW4L , 1769-IQ6XOW4M , 1769-IQ6XOW4N , 1769-IQ6XOW4O , 1769-IQ6XOW4P , 1769-IQ6XOW4Q , 1769-IQ6XOW4R , 1769-IQ6XOW4S , 1769-IQ6XOW4T , 1769-IQ6XOW4U , 1769-IQ6XOW4V , 1769-IQ6XOW4W , 1769-IQ6XOW4X , 1769-IQ6XOW4Y , 1769-IQ6XOW4Z ,

Some of the products sold by Do Supply Inc. may come with firmware installed on them. Do Supply Inc. makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. Read more...