Call Us Today!
1-800-730-0292
sales@dosupply.com

Allen Bradley CompactLogix

1769-OW8I | Allen Bradley CompactLogix

DO Supply Company is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Available

Ships Today!

Request a Quote
Manufacturer Allen Bradley CompactLogix
Description The 1769-OW8I is a compact Eight (8) channel isolated relay output module. This module can be used on mixed application of DC and AC loads.
Weight 2 lbs :: ≈ 1 kgs
Warranty 1 Years
Technical Specifications
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 1769- OW8I
Product Family: CompactLogix
Product Type Discrete Output Module
No. of Outputs: 8 (Isolated)
No. of Groups: 8; Each channel individually isolated
Power Supply Distance rating: 8
Voltage Category: AC/DC normally open relay
Operating Voltage range: 5 to 265V ac 5 to 125V dc
Signal delay, On: 10 ms
Signal delay, Off: 10 ms
Bus Current draw, 5.1 V: 125 mA
Bus Current draw, 24 V 100 mA
Heat Dissipation: 2.83 Watts
About the 1769-OW8I
The 1769-OW8I is used with Allen Bradley’s 1769 CompactLogix product family. This module has Eight (8) relay type isolated outputs that can be used to drive AC and DC loads. Each point is isolated with a pair of terminals, one terminal intended for the positive (+) signal wire and another terminal for the signal common. The module can be used with MicroLogix 500 and CompactLogix controllers. Configure using RSLogix500 programming software and RSLogix5000 or Studio5000 programming software respectively. The module’s configurable parameters include module inhibition, packet interval, slot assignment and revision number provide a convenient way to fine tune the operation of the module. Further parameterization can be done by accessing the module’s input data files. The data files store the status of the input addresses as well as module diagnostics. When terminating signal wires, use single conductor wire type Cu-90°C (194°F) with nominal sizez range of #14 to #22 AWG. For stranded wires, use Cu-90°C (194°F) with wire size range of #16 to #22 AWG. The power supply distance rating of 1769-OW8I is 8 modules. There is no limit to the number of modules that can be used as long as the distance rating is observed. The module can be inserted to any adjacent I/O module including the controller in the chassis. The module is shipped with a removable terminal block with part number 1769-RTBN18, Door label with part number 1769-RL1 and Door having a part number 1769-RD.
Revisions: 1769-OW8IA , 1769-OW8IB , 1769-OW8IC , 1769-OW8ID , 1769-OW8IE , 1769-OW8IF , 1769-OW8IG , 1769-OW8IH , 1769-OW8II , 1769-OW8IJ , 1769-OW8IK , 1769-OW8IL , 1769-OW8IM , 1769-OW8IN , 1769-OW8IO , 1769-OW8IP , 1769-OW8IQ , 1769-OW8IR , 1769-OW8IS , 1769-OW8IT , 1769-OW8IU , 1769-OW8IV , 1769-OW8IW , 1769-OW8IX , 1769-OW8IY , 1769-OW8IZ ,

Disclaimer*
Some of the products sold by Do Supply Inc. may come with firmware installed on them. Do Supply Inc. makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. Read more...